Authors
Mike Spooner
My interest in the tiny house movement started when Jay Shafer built his first Tumbleweed years ago. I dreamed of designing and building my own tiny home until 2016 when I started to turn that dream into a reality. I finished ProcessHouse, my first build, in 2020, followed by a Prius camper build-out 2 years later. Now I am putting the skills I’ve gained and passion for creating innovative and beautiful small spaces towards Teaspoon Dwellings, my custom tiny home and camper business.
My core values are: Authenticity, Mindfulness, Beauty, Exploration, and Resourcefulness (AMBER). My hope is that these values are reflected in everything I create.
For all inquiries, please email me at moc.sgnillewdnoopsaet@renoopsm
Posts 1 to 10 of 19
We’ve sort of fallen off the blogwagon over the last month or two. As of a week ago, the cedar siding is complete. This was by far the most tedious, but also most rewarding part of the project so far. Over the July 4th weekend I completed the Ice & Water shield roofing underlayment and finishing touches on… View More
Mikey and I have been making some pretty decent progress over the past 10 days. It is SO NICE to have weather again that doesn’t freeze your fingers off if you try to do anything outside - or even indoors in our unheated garage and workshop or inside the Tiny House itself! Doors and Trim A lot of time and meticulous effort was needed to complete the two door installations. We knew that one of the rough openings -… View More
This weekend I finished fastening the sheathing to the roof (doing much better with heights now!) and Dad and I completed the house wrap. I chose Hydro Gap from Benjamin Obdyke, which is a “drainable” housewrap. It has little spacers on the surface to allow water that gets behind your siding to drain out. Sort of a mini rain-screen. Useful tip: A belt sander with 36 grit sandpaper comes in real handy when you need to… View More
After all framing was up, I started on two rows of blocking–pieces of 2x4 material fit between each stud and run horizontally along the length of each wall. Most codes specify that all edges of each panel of sheathing should land on solid blocking. This makes the structure much stronger. This will also give me solid backing to attach my interior plywood to. Because of the height of my walls, I determined that I would need two rows of… View More
The past 2-3 weeks has been focused on wall construction, with three wall segments now standing and one nearing completion. Before I began on the walls, I still had a few decisions to make. This ended up taking longer and being more stressful than I had anticipated. The main decision I faced was the interplay of the interior headroom, roof pitch, and wall height. My design (which I’ll show more of soon) features a roof that… View More
First, thanks to my dad (Jon) for stepping in and giving this blog a second life. Before my dad picked it back up, I had resigned myself to the fact that I was going to have to make some sacrifices in order to make ProcessHouse into a reality and not just a blog. Unfortunately, one of those sacrifices was, in fact, blogging. However, as my father and I began construction back in May, I discovered he… View More
This long, cold, and (very) snowy Winter has given me plenty of time to think and re-think my tiny house plans. All that thinking has led me to explore some totally new ideas, culminating in an alternate design which actually has its basis in some of my earliest plans from a year ago, but draws heavily on the experience I’ve gained while working on the model I’ve been featuring on this blog. While I love much about… View More